6″ Resin Filled Encapsulated Submersible Motors
C.R.I. "R series" motors are deep well / bore hole encapsulated submersible type, pre filled with anti-freeze agent as coolant and lubricant. These motors are available in single phase and three phase power supply. All single phase motors are thermally protected and specific ranges are in-built with lightening arrester. Rotors are supported with bush and thrust bearings to withstand maximum axial and radial thrust loads. All mounting dimensions are in accordance with NEMA standards.
| Nominal Diameter | 6" |
| Series | Resin Filled Encapsulated Submersible Motors |
| Power Range (kW) | Three Phase : 5.0HP - 30 HP |
| Speed in RPM | 3450 |
| Versions | Three Phase - 230V,380V & 460V, 60Hz |
| Maximum Down Thrust Load | 5.0HP - 30HP - 3485 lbs |
| Type of Duty | S1 (Continuous) |
| Degree of Protection | IP 68 |
| Class of Insulation | F |
| Max.Temperature of Liquid | 86˚F |
| Minimum Cooling Flow Along the Motor | 0.5 ft/sec |
| Maximum Starts per Hour | 12 Times |
| Available M.O.C | Type B |
- High effieicency
- Corrosion resistant stainless steel motor body
- Extremely hardwearing water lubricated bearings
- Rigid in construction
- water supply
- Industries
- Agriculture
- Commercial Buildings
- Pressure boosting
- Livestock watering
- Fire fighting
- Sprinkler and pivot irrigation system
- Construction & mining De-watering
